Welcome to Sino Bearings web
24x7 HOTLINE：+86-28-81454188
TECHNOLOGY
FREQUENT Q/A
Tapered roller bearings belong to separation bearings, bearing inner and outer rings have tapered raceway. The bearings can be divided into single row, double row and four row tapered roller bearings according to the number of roller rows....
The fit of thrust bearing and shaft is generally transition fit, and the fit of seat ring and bearing seat hole is generally clearance fit. The middle shaft ring of bi-directional thrust bearing should be fixed on the shaft to prevent rotat...
Thrust ball bearings generally have better centripetal performance but smaller load than thrust roller bearings. The thrust ball bearing is designed to withstand thrust load when running at high speed and consists of a gasket-like ring with...
Common faults of turntable bearings 1, rotation is not flexible Bearing may occur when using the phenomenon of rotation is not flexible, there are several reasons for this phenomenon is caused by, general because grease in the bearing racew...
1. Appearance discrimination (1) See if there are obvious oil stains. In order to prevent bearing rust in the process of transportation and use, manufacturers generally carry out anti-rust treatment on its surface when producing bearings. S...
Tapered roller bearings belong to separation bearings, bearing inner and outer rings have tapered raceway. The bearings can be divided into single row, double row and four row tapered roller bearings according to the number of roller rows....
First, different nature 1. Seals: materials or parts that prevent fluid or solid particles from leaking from adjacent joint surfaces and prevent external impurities such as dust and water from intruding into the internal parts of machinery...
What are the advantages of stainless steel skeleton oil seal Advantages: Polytetrafluoroethylene (PTFE), also known as teflon/teflon or plastic King (F4), is a copolymer of tetrafluoroethylene monomer, it has the following advantages; 1. Ch...
How to judge the failure of tensioner bearings...
What is the difference between self-aligning bearings and deep groove ball bearings...