TECHNOLOGY

FREQUENT Q/A

What do precision classes mean for needle roller bearings? -KMK BEARING

Bearing NewsNov 09, 2026

Quick answer

Q: What do precision classes mean for needle roller bearings?

A: How industrial robots, cobots, mobile systems and humanoids are reshaping the demand for precision bearings The robotics industry is entering a phase that could fundamentally reshape the global demand for precision bearings and motion components. For.

In detail

For decades, industrial robotics was largely associated with automotive factories, welding lines, palletizing cells and highly repetitive manufacturing processes. Bearings played an important but relatively specialized role inside these machines, supporting the rotating joints, servo motors, gearboxes and reducers that made precise motion possible. That picture is now changing rapidly.

Robotics is expanding from conventional factory automation into collaborative robots, autonomous mobile robots, medical systems, laboratory automation, agricultural equipment, inspection platforms, quadrupeds, exoskeletons and increasingly humanoid robots. At the same time, advances in artificial intelligence, sensing, batteries, motors and precision actuation are allowing robots to become more autonomous, more mobile and capable of performing a much wider range of tasks. For bearing manufacturers, this development deserves close attention.

A robot ultimately depends on mechanical motion. Every movement of a robotic arm, wrist, wheel, finger, shoulder, knee or actuator requires some form of controlled rotational or linear movement. Bearings therefore sit at the very heart of robotic performance.

They influence positioning accuracy, stiffness, payload, speed, friction, energy consumption, vibration, repeatability and service life. As robots become smaller, lighter, faster and more intelligent, the demands placed on those bearings are also increasing. The result could be the emergence of robotics as one of the most important high-value growth markets for the global bearing industry between now and 2050.

Robotics is already a substantial industrial market The starting point is the existing industrial robot market. The International Federation of Robotics recorded more than 542,000 new industrial robot installations worldwide in 2024. The global operational stock had already reached approximately 4.66 million units.

Annual installations have remained above half a million robots for several consecutive years, showing that robotics has moved far beyond a niche automation technology. Asia dominates the market, representing roughly three quarters of new installations. China alone accounted for more than half of all industrial robots installed worldwide during 2024.

The largest application industries continue to include electronics, automotive manufacturing and metals and machinery, but adoption is gradually expanding into food processing, pharmaceuticals, logistics, general manufacturing and small and medium-sized companies. The market is therefore becoming increasingly diversified. The next stage of growth will not simply come from additional robot installations in automotive plants.

It will come from the expansion of robotics into industries and applications that historically used much less automation. This creates a much broader addressable market for bearing and power-transmission suppliers. Beyond the traditional industrial robot The traditional six-axis industrial robot remains the most recognizable robot in manufacturing.

These systems typically perform welding, assembly, painting, material handling, machine tending, inspection and palletizing. Each of the major joints contains sophisticated bearing arrangements capable of carrying combined axial, radial and moment loads while maintaining extremely high rigidity. However, several newer robot categories are expanding rapidly.

Collaborative robots, commonly known as cobots, have become one of the most important developments in manufacturing automation. Unlike traditional industrial robots, which frequently operate inside safety cages, cobots are designed to operate closer to human workers. This places different demands on the mechanical system.

Cobot joints must often be lighter, more compact, quieter and more sensitive to torque. Low friction becomes particularly important because the control system frequently uses torque feedback to detect collisions or interaction with humans. The mechanical architecture of a cobot joint is therefore highly integrated.

A typical joint may combine a servo motor, encoder, brake, precision reducer, torque sensor and bearing system inside a compact housing. That creates an attractive market for precision bearing manufacturers. Autonomous mobile robots represent another major growth category.AMRs are increasingly being used in warehouses, distribution centers, factories, hospitals and airports.

Unlike fixed industrial robots, these machines move continuously around their operating environment. Their bearing requirements are therefore different. Drive-wheel bearings, electric motor bearings, gearbox bearings, steering systems, caster wheels, conveyor rollers and lift mechanisms all contribute to bearing demand.

The individual bearing value per robot may be lower than in a sophisticated articulated robot, but the potential unit volumes are significantly higher. Medical robotics represents another rapidly expanding area. Surgical robots, rehabilitation systems, diagnostic equipment and laboratory automation require exceptional levels of precision and reliability.

In these environments, bearing quality is often more important than bearing cost. Low friction, very low noise, minimal particle generation, clean lubrication and extremely smooth movement can become critical requirements. As healthcare automation expands, medical robotics could become one of the most technically demanding application markets for precision bearing manufacturers.

The humanoid question The biggest long-term uncertainty, and potentially the biggest opportunity, is humanoid robotics. Today, humanoids remain a very small market compared with industrial robotics. Only tens of thousands of humanoid robots have entered early commercial deployment.

Yet the amount of investment going into this field is substantial. Companies including Tesla, Figure AI, Apptronik, Agility Robotics, Unitree, UBTech, AgiBot and several other developers are working toward robots capable of performing human-like physical tasks. Their longterm ambition is not necessarily to create robots for one specific operation.

The objective is to develop generalpurpose machines capable of working in environments that were originally designed for humans. This has profound consequences for mechanical design. A humanoid robot can contain dozens of actuated joints.

The neck, shoulders, elbows, wrists, hands, fingers, waist, hips, knees and ankles may all require individual actuators. Depending on the architecture, a humanoid may have between 25 and more than 60 degrees of freedom. Advanced hands can add many additional movements.

From a bearing perspective, this potentially makes the humanoid one of the most bearingintensive machines ever produced at scale. A sophisticated humanoid could plausibly contain between 60 and more than 100 rolling-bearing positions when the bearings inside joints, motors, reducers and auxiliary mechanisms are counted. That does not mean every future humanoid will use exactly this architecture.

Some systems may rely more heavily on plain bearings, bushings, directdrive motors, roller screws or integrated actuator technologies. Nevertheless, the potential scale is difficult to ignore. If humanoid production eventually reaches millions of units per year, the resulting bearing demand could be enormous.

Why robot bearings are different Robotic applications present an unusual combination of requirements. One of the most important is rigidity. A small amount of deflection inside a robot joint can create a much larger positioning error at the end of the robot arm.

For example, microscopic movement inside a shoulder joint may result in measurable displacement several hundred millimeters away at the end effector. This means the main joint bearing must be capable of resisting overturning moments while maintaining extremely precise geometry. Backlash is another critical factor.

Industrial and medical robots may require repeatability measured in hundredths of a millimeter. Any mechanical play inside the bearing or reducer affects that accuracy. Friction is becoming increasingly important.

In traditional heavy industrial robots, rigidity and load capacity often dominated mechanical design. In cobots, mobile robots and humanoids, energy efficiency is becoming equally important. Lower friction reduces motor torque requirements and extends battery life.

It also improves torque sensing and allows smoother interaction with humans. Weight presents another challenge. Every gram added to the end of a robot arm increases the torque required from the joints further upstream.

This becomes particularly important in mobile and humanoid robots. Lightweight bearing designs therefore have significant strategic value. Another unusual characteristic of robot operation is oscillation.

Many bearings are designed for continuous rotation. Robot joints frequently move only through limited angles and continuously reverse direction. This can produce lubrication conditions that are very different from those found in conventional motors or machinery.

False brinelling, fretting, grease migration and lubricant starvation can therefore become important design considerations. Crossed-roller bearings: a cornerstone of robot joints Among the different bearing technologies used in robotics, crossed-roller bearings have become one of the most important. In a crossed-roller bearing, cylindrical rollers are arranged alternately at 90 degrees.

This allows one compact bearing to support radial loads, axial loads and overturning moments simultaneously. The design provides exceptionally high rigidity and rotational accuracy. These characteristics make crossed-roller bearings particularly suitable for robot bases, shoulders, elbows, wrists and precision reducer outputs.

Instead of using several separate bearings, engineers can sometimes use a single crossed-roller arrangement. This reduces packaging space while maintaining rigidity. Crossed-roller bearings are therefore likely to remain one of the highest-value robotic bearing categories.

Thin-section bearings and the race for lower weight Another bearing type particularly well suited to robotics is the thin-section bearing. These bearings maintain a relatively small cross section even as diameter increases. The result is a bearing that can provide a large internal bore while remaining lightweight.

This has several advantages in robotics. Electrical cables, pneumatic tubes, data lines and sensors often need to pass through the center of a robot joint. A thin-section bearing allows engineers to create this hollow passage while reducing the overall size and weight of the actuator.

Thin-section bearings are already used in robot wrists, elbows, medical systems, semiconductor equipment and collaborative robots. Their importance could increase dramatically if humanoid and mobile robotics expand. For battery-powered robots, reducing weight is directly connected to energy efficiency.

A lighter joint requires less torque to accelerate and decelerate. This means that bearing weight can influence not only the mechanical design but also battery size, motor selection and robot operating time. Angular-contact bearings Angular-contact ball bearings represent another major category.

They can support both radial and axial loads and can be preloaded to create a very rigid arrangement. They are frequently used in servo motors, robotic joints, precision gearboxes and ball-screw support systems. Their relatively low friction makes them particularly attractive where energy efficiency and smooth movement are important.

In many compact robot joints, angularcontact bearings may compete with crossed-roller designs. The choice depends on the required moment capacity, stiffness, packaging constraints and friction targets. Precision reducer bearings The bearing market inside robotics extends beyond the main robot joint.

Precision reducers represent one of the most important component groups inside industrial and collaborative robots. Harmonic or strain-wave reducers are widely used in compact robot joints. Their architecture includes a wave generator, flexible spline and circular spline.

The wave generator itself normally contains a specialized flexible bearing. Unlike a conventional bearing, this bearing repeatedly deforms into an elliptical shape during operation. This places unusual fatigue and geometry requirements on the bearing.

Cycloidal and RV reducers represent another major class. These systems are particularly common in higher-load robot joints. They can contain multiple bearing positions supporting eccentric shafts, input shafts, cycloidal discs and output structures.

These reducer bearings must withstand high forces while maintaining exceptional rotational accuracy. For bearing manufacturers, reducer bearings may therefore become one of the most attractive areas of the robotics market. Needle roller bearings and compact actuator design Needle roller bearings offer very high load capacity relative to their radial dimensions.

That makes them particularly interesting in compact actuators. Needle bearings can be used inside reducers, planetary gearboxes and highly integrated robot joints. As robot designers continue trying to increase torque density, technologies capable of carrying more load in less space will become increasingly valuable.

Miniature bearings and robotic hands Humanoid hands may eventually create an entirely new bearing market. A human hand contains numerous joints and degrees of freedom. To replicate even part of this functionality, robotic hands may require many miniature actuators.

These actuators can contain miniature ball bearings, needle bearings, gears and small drive systems. Medical robotics, laboratory automation and small end effectors already use large numbers of miniature bearings. If dexterous robotic hands reach mass production, demand could increase substantially.

This is a good example of how robotics may create growth not only for large precision bearings but also for extremely small bearing technologies. Linear bearings, ball screws and roller screws Not every robot joint needs to rotate. Linear actuators are also becoming increasingly important.

Cartesian and gantry robots already depend heavily on linear guides, recirculating ball bearings and ball screws. Future humanoids may also use linear actuators in legs or other high-load joints. Ball screws, roller screws and planetary roller screws can convert rotary motor motion into very high linear forces.

These systems require precision support bearings capable of carrying significant axial loads. This means the growth of humanoid robotics could benefit not only conventional rolling bearings but also the broader linear-motion industry. How many bearings does a robot contain?

The answer varies significantly depending on robot architecture. A conventional six-axis industrial robot could contain approximately 30 to 70 or more bearing positions across: the base, shoulder, elbow, wrist, servo motors, precision reducers, and end effector. Heavy industrial robots can contain even more.

Collaborative robots might contain approximately 25 to 50 bearing positions. An autonomous mobile robot may use perhaps 8 to 20 bearings across wheels, motors, steering systems and gearboxes. Medical robots may use 20 to 50 or more precision bearings.

Humanoids could contain 60 to more than 100 bearing positions. These figures should not be interpreted as fixed industry standards. Robot architectures differ considerably.

But they provide an indication of the potential bearing intensity. What could the robotics bearing market be worth There is currently no comprehensive global database measuring the exact number or value of bearings sold specifically into robotics. Published market studies also use different definitions.

Some include only industrial robot bearings. Others include service robots and broader automation systems. For this reason, BearingNews made the analyis on the estimated bearins based on published third-party market estimates.

The resulting central estimate places the core precision robotics bearing market at approximately 1.17 billion € in 2025. This is broadly consistent with independent published estimates for industrial robot bearings. The number of precision robotic bearing units supplied during the year is estimated at approximately 35 million pieces.

This excludes large numbers of inexpensive bearings used inside consumer products such as robotic vacuum cleaners. The important point is not simply today’s market size but the potential growth trajectory. A possible 16 billion € market by 2050 Under this base scenario, the precision robotics bearing market could grow from approximately: → 1.17 billion € in 2025 to: → 2 billion € in 2030, → 3,5 billion € in 2035, → 6.5 billion € in 2040, → 10,6 billion € in 2045, → and approximately 16 billion € by 2050.

This table would represent average longterm annual growth of approximately 11%. Under a more conservative scenario in which humanoid commercialization remains limited, the market could still reach approximately 6 billion € by 2050. Under an accelerated humanoid scenario, the addressable market could exceed 42 billion €.

These figures should be regarded as strategic scenarios rather than precise forecasts. The uncertainty becomes particularly high after 2035. Nevertheless, even the conservative scenario implies substantial growth relative to the wider mature bearing market.

Bearing volumes could approach one billion pieces The unit-volume implications are equally significant. We estimate approximately 35 million precision robotics bearing units in 2025. Under the base scenario, annual demand could rise toward: 60 million pieces in 2030, 120 million in 2035, 270 million in 2040, 520 million in 2045, and approximately 900 million precision bearing pieces per year by 2050.

If humanoid adoption becomes significantly stronger than the base case, the potential volumes would be considerably higher. The humanoid bearing TAM Humanoids deserve separate analysis. At current production levels, their bearing market remains extremely small.

With perhaps 13,000 to 16,000 humanoids shipped or installed globally during 2025, the associated bearing opportunity may only be measured in tens of millions of euros. That could change quickly. If humanoid production reaches around 250,000 to 750,000 units annually by 2030, and each machine contains between 70 and 100 bearing positions, annual humanoid bearing demand could already reach tens of millions of units.

By 2035, external forecasts ranging from approximately 1.4 million to 2.6 million humanoid shipments would imply potential annual bearing requirements exceeding 100 million pieces. Beyond that point, uncertainty increases significantly. If humanoid production eventually reaches tens of millions of units per year, the bearing market could become enormous.

Under a mature 2050 scenario, humanoid robots alone could represent an annual bearing opportunity measured in several billion to tens of billions of euros. The range is extremely wide because the outcome depends on AI capability, battery technology, robot reliability, regulation, labor economics and manufacturing cost. Bearing value per robot The value of bearings inside robots varies substantially.

A heavy industrial articulated robot may contain 1,500€ to 5,000€ worth of bearings. A mediumsized industrial robot might contain 800€ to 2,500€. A collaborative robot could contain approximately 350€ to 1,200€.

Medical robots can exceed these values because of the exceptionally demanding specifications. Humanoid robots represent an interesting case. Early-generation machines may contain 800€ to 2,500€ worth of bearings.

However, as production volumes increase, standardized actuator designs and manufacturing scale should reduce the average cost. A mature mass-produced humanoid might eventually contain only several hundred euors worth of bearings despite using many individual bearing positions. This is similar to developments seen in other high-volume industries.

Component sophistication increases while manufacturing cost decreases. Which bearing types could benefit most? Crossed-roller bearings are expected to remain one of the largest specialist categories.

They currently represent an estimated one-third of the precision robot-bearing market. Thin-section bearings are likely to gain share as mobile robots and cobots increase. Angular-contact bearings should remain highly important because of their combination of precision and low friction.

Specialized reducer and flexible bearings could become one of the strongest growth categories because increasingly compact robot joints require integrated reduction systems. Needle bearings could benefit from the drive toward higher torque density. Miniature bearings could expand strongly through medical robotics and humanoid hands.

Ball-screw and roller-screw support bearings could benefit if linear actuation becomes more common in humanoids and exoskeletons. Deep-groove bearings will continue generating substantial volumes inside motors, wheels and auxiliary equipment. The overall market therefore represents an unusually broad opportunity across the bearing industry.

The future is the actuator, not simply the bearing Perhaps the most important strategic shift for the bearing industry is not market volume. It is integration. Historically, a bearing manufacturer supplied a bearing.

The robot manufacturer then combined that bearing with a motor, reducer, encoder and housing. Increasingly, robotics companies prefer highly integrated actuator modules. A future robotic joint may include: → bearing, → precision reducer, → servo motor, → encoder, → torque sensor, → brake, → controller, → and condition monitoring inside one compact module.

This means bearing companies face a strategic choice. They can continue supplying individual components. Or they can move further upstream into integrated motion systems.

Several major bearing manufacturers are already moving in this direction. The value captured a complete robotic joint could be several times higher than the value captured alone. Smart bearings could become part of robot intelligence Robotics may also accelerate the development of sensorized bearings.

A robotic bearing could potentially measure: → temperature, → vibration, → load, → torque, → position, → or lubrication condition. This information could feed directly into the robot control system. Instead of being a passive mechanical component, the bearing could become part of the robot’s sensing architecture.

This would enable predictive maintenance, overload detection, collision recognition and remaining-life estimation. For high-value robots, these capabilities could generate significant value. The aftermarket will grow with the installed base Most attention today focuses on bearings supplied into new robots.

But the global operational population of industrial robots already exceeds 4.6 million units. As this installed base ages, the aftermarket opportunity grows. Robot joints, reducers and actuators eventually require maintenance or refurbishment.

That creates opportunities for bearing distributors, repair companies and MRO specialists. Potential services include: → bearing replacement, → reducer repair, → actuator refurbishment, → lubrication, → condition monitoring, → remanufactured joints, → and robot modernization. By 2040 or 2050, the robotics aftermarket could become almost as important as supplying newly manufactured robots.

A new strategic market for the bearing industry It is still too early to know whether humanoid robots will become as widespread as some current forecasts suggest. Several major technical challenges remain. Physical-world AI is significantly more difficult than software intelligence.

Battery energy density limits operating time. Reliability must improve. Dozens of actuators create many potential failure points.

Safety regulation will become increasingly important. Robot economics must compete with human labor. Yet the direction of travel is clear.

Robots are becoming more numerous, more capable and more mechanically sophisticated. They are entering industries that historically used little automation. And almost every one of these machines depends on precise mechanical motion.

For bearing manufacturers, robotics therefore represents more than another end-user segment. It represents the convergence of some of the industry’s most advanced capabilities: precision manufacturing, miniaturization, low friction, high rigidity, specialized lubrication, sensing, and integrated motion control. The market may still be relatively small compared with automotive or general industrial bearing demand today.

But its strategic importance could be much greater than its present size suggests. Between now and 2050, robotics could develop into one of the bearing industry’s largest high-value growth markets. The companies best positioned to benefit may not necessarily be those producing the largest volumes of conventional bearings.

They may be the companies capable of solving the next generation of robotic motion problems. Because whether the machine is an industrial arm, a surgical robot, an autonomous warehouse vehicle or a humanoid worker, one fundamental requirement remains unchanged: It has to move. And wherever movement must be precise, efficient, reliable and repeatable, bearing technology will remain at the center of the machine.

This article is published in BearingNews March 2026 issue How KMK Bearing Applies This At KMK Bearing (SINO BEARINGS, KMK brand) these principles guide the bearings in Chengdu, China. Our process chain - material selection, heat treatment, precision grinding, superfinishing and cleanroom assembly - is built to the standards described above, whether for a standard catalog part or a custom-engineered solution. 20+ years of precision bearing manufacturing - annual capacity of 3,000,000 sets Large finished-goods and semi-finished stock for very short lead times Materials from chrome steel (GCr15) to 17-4PH stainless steel and full ceramic (ZrO2, Si3N4) In-house heat treatment and metrology to P4/P2 (ABEC 7/9) precision; ISO 9001 & CE certified Flexible moq based on product value and production status - custom designs from drawings or samples Exporting to 30+ countries Discuss your application with [email protected] or browse our bearing catalog.

SINO BEARINGS (KMK) - Perfect Quality -- Great Service -- Customized.

Related questions

How should needle roller bearings be lubricated?

Robotics Could Become One of the Bearing Industry’s Biggest Growth Markets How industrial robots, cobots, mobile systems and humanoids are reshaping the demand for precision bearings The robotics industry is entering a phase that could fundamentally reshape the global demand for precision bearings and motion compo. Industries How industrial robots, cobots, mobile systems and humanoids are reshaping the demand for precision bearings The robotics industry is entering a phase that could fundamentally reshape the global demand for precision bearings and motion components.

Which material is best for needle roller bearings?

Robotics Could Become One of the Bearing Industry’s Biggest Growth Markets How industrial robots, cobots, mobile systems and humanoids are reshaping the demand for precision bearings The robotics industry is entering a phase that could fundamentally reshape the global demand for precision bearings and motion compo. Industries How industrial robots, cobots, mobile systems and humanoids are reshaping the demand for precision bearings The robotics industry is entering a phase that could fundamentally reshape the global demand for precision bearings and motion components.

How much load can needle roller bearings carry?

Robotics Could Become One of the Bearing Industry’s Biggest Growth Markets How industrial robots, cobots, mobile systems and humanoids are reshaping the demand for precision bearings The robotics industry is entering a phase that could fundamentally reshape the global demand for precision bearings and motion compo. Industries How industrial robots, cobots, mobile systems and humanoids are reshaping the demand for precision bearings The robotics industry is entering a phase that could fundamentally reshape the global demand for precision bearings and motion components.

How KMK Bearing Applies This

At KMK Bearing (SINO BEARINGS, KMK brand) these principles guide the bearings we manufacture in Chengdu, China. Our process chain - material selection, heat treatment, precision grinding, superfinishing and cleanroom assembly - is built to the standards described above, whether for a standard catalog part or a custom-engineered solution.

  • 20+ years of precision bearing manufacturing - annual capacity of 3,000,000 sets
  • Large finished-goods and semi-finished stock for very short lead times
  • Materials from chrome steel (GCr15) to 17-4PH stainless steel and full ceramic (ZrO2, Si3N4)
  • In-house heat treatment and metrology to P4/P2 (ABEC 7/9) precision; ISO 9001 & CE certified
  • Flexible moq based on product value and production status - custom designs from drawings or samples
  • Exporting to 30+ countries

Discuss your application with [email protected] or browse our bearing catalog.


SINO BEARINGS (KMK) - Perfect Quality -- Great Service -- Customized.


Source: Bearing News

By Bearing News · Bearing design & application specialists

This article is prepared by the SINO BEARINGS (Sinoti Tech) engineering team, based on published bearing standards (ABEC / ISO P0–P2), material datasheets, and field application experience across industrial, food, medical and aerospace uses. For manufacturer background, certifications and facilities, see our About page.

Related articles:

What do precision classes mean for full ceramic bearings? -KM What do precision classes mean for full ceramic bearings? -KM How to avoid hidden costs by using precision bearings What are the precision grades of bearings? What precision should the installation of the bearing seat e
24X7 HOTLINE: +86-28-81454188