Notes for micro bearing

SINO BEARINGSJul 28, 2022

Notes for micro bearing:

1. Place the yoke iron on the end face of the main engine.

2. Insert the plug into the power socket with the control switch.

3, check whether the grounding line is good, after the power with the test pen test.

4, press the start button, the host power.

5, check the yoke to the ground should be no voltage.

6. Press the stop button to power off the host and stop heating.

7, according to different specifications of miniature bearings or other workpieces, choose different yoke iron sleeve, put the yoke iron on the top surface of the main machine, should be consistent with smooth.

8. When heating the micro bearing, the sensor should be inserted into the "sensing socket", and the sensor should be close to the heated workpiece.

By CINDY · Bearing design & application specialists

This article is prepared by the SINO BEARINGS (Sinoti Tech) engineering team, based on published bearing standards (ABEC / ISO P0–P2), material datasheets, and field application experience across industrial, food, medical and aerospace uses. For manufacturer background, certifications and facilities, see our About page.

How to Choose the Right Hybrid Ceramic Bearings for Your App Precision Gearing Solutions Engineered for Advanced Mechanica How to Choose the Right Miniature Bearings for Your Applicat NTN Europe Unveils ROX: Spherical Roller Bearing Built for Mi NTN Europe Unveils ROX: Spherical Roller Bearing Built for M

Previous丨

The use of miniature bearings

Next丨

The reason and solution of invalid miniature bearing

Reture

24X7 HOTLINE： +86-28-81454188

TECHNOLOGY

PRODUCTS

Notes for micro bearing

CONTACT US